Buckleys International Testing Products

Call us on +44 (0)1303 278888

Geo Pro' - Geomembrane arc testing kit

Part Number: 6002-0072

Product Features

  • Compact and portable
  • Simple to use
  • Clear display and controls
  • Visual and audible alarm with volume control
  • Automatic output voltage selector
  • Accurate sensitivity control
  • Compatible with a wide range of accessories
  • Robust cast aluminium outer casing
  • One year ‘back to base’ warranty
  • CE approved

The Geo Pro’ is a geomembrane integrity testing kit which uses Buckleys' tried and tested high-voltage DC technology for the post-installation testing of geomembranes for leaks and faults prior to going in to service.

Battery-powered and fully portable; the Geo Pro’ detects an electrical path to earth through leaks and defects in non-conductive geomembrane materials from 64μm to 25.6mm in thickness.

As the electrode is ‘swept’ over the geomembrane’s dry surface, any faults which allow current to pass to earth trigger the detector’s alarm system; alerting the user.

The Geo Pro’ contains everything required to start testing immediately, including an extensive range of accessories and electrodes; all supplied in a robust, foam-lined transit case.

COMPLETE KIT INCLUDES

  • Geo Pro’ detector unit, probe handle & interconnecting lead 
  • Drum brush electrode 
  • 4 x rechargeable D-cell batteries and charger 
  • 5m earth lead on reel 
  • 50m earth extension lead 
  • ESD anti-static wrist band 
  • 75mm pointed probe electrode 
  • 2 x 330mm insulated mid-section extension rod 
  • 1 x 330mm insulated end-section extension rod 
  • 450mm straight phosphor-bronze brush electrode (45° angled) 
  • Knurled thumb-nut & back nut (for electrode attachment) 
  • Test voltage calculator 
  • Carry bag with shoulder strap 
  • User instruction manual and calibration certificate 
  • Supplied in a robust, foam lined, high-visibility transit case

• Output voltage range: 2 to 40kV DC

• Alarm sensitivity range: 10 to 450μA (pre-set to 350μA)

• Coating thickness range: 64μm to 25.6mm

• Built-in test voltage formula: NACE SP0274

• Unit weight: 1.64Kg

• Unit dimensions: 172mm x 85mm x 235mm

• Handle weight: 720g

• Handle dimensions: 290mm x 85mm

• Packed weight: 13.6kg

• Dimensions (packed): 510mm x 250mm x 630mm

Commodity Code: 9027802000

No questions are available at this time

Be the first to ask!



Straight phosphor-bronze brush - 45° - 100mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

Straight phosphor-bronze brush - 45° - 150mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

Straight phosphor-bronze brush - 45° - 200mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight phosphor-bronze brush - 45° - 250mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight phosphor-bronze brush - 45° - 300mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight phosphor-bronze brush - 45° - 450mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight phosphor-bronze brush - 45° - 500mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight phosphor-bronze brush - 45° - 600mm

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Roller electrode 500mm

Roller electrode are used for testing large flat areas with ease – ideal for use with roofing kits.   ...

Roller electrode 600mm

Roller electrode are used for testing large flat areas with ease – ideal for use with roofing kits.   ...

Roller electrode 700mm

Roller electrode are used for testing large flat areas with ease – ideal for use with roofing kits.   ...

Straight silicone rubber - 450mm - 45°

They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straightonto the test probe handle.*Maximum length recommended for use with AC equipment is 150mm...

© 2020 All Rights Reserved Buckleys (UVRAL) Ltd