Buckleys International Testing Products

Call us on +44 (0)1303 278888

PHD Pro' 2kV - 40kV Pinhole Detector - Complete Kit (PHDP40C)

Part Number: 6002-0067

Product Features

  • Compact and portable
  • Simple to use
  • Clear display and controls
  • Visual and audible alarm with volume control
  • Automatic output voltage selector
  • Accurate sensitivity control
  • Compatible with older PD accessories
  • Robust cast aluminium outer casing
  • One year ‘back to base’ warranty
  • CE approved

The PHD Pro’40 range of high-voltage DC holiday detectors are ideal for rapid and effective holiday testing of a wide range of non-conductive coatings and linings for porosity, faults and defects. 

Battery-powered and fully portable; the PHD Pro’40 has an output voltage range of 2-40kV, enabling it to perform high-voltage holiday tests on coating thicknesses from 64μA to 25.6mm.

The PHD Pro’40C (complete kit) comprises an extensive range of accessories and electrodes; supplied in a robust, foam-lined case.

The Complete kit includes:

  • PHD Pro’40 holiday detector, probe handle & interconnecting lead
  • Drum brush electrode
  • 4 x rechargeable D-cell batteries and charger
  • 5m earth lead on reel
  • 50m earth extension lead
  • ESD anti-static wrist band
  • 75mm pointed probe electrode
  • 2 x 332mm insulated mid-section extension rod
  • 1 x 332mm insulated end-section extension rod
  • 450mm straight phosphor-bronze brush electrode (45° angled)
  • Knurled thumb-nut & back nut (for electrode attachment)
  • Test voltage calculator
  • Carry bag with shoulder strap
  • User instruction manual and calibration certificate
  • Supplied in a robust, foam lined, high-visibility transit case kit contains everything required to test a variety of coatings and its high-visibility transit case protects the PHD Pro’40C during transport whilst remaining conveniently portable.
  • Output voltage range: 2 to 40kV DC
  • Alarm sensitivity range: 10 to 450μA (pre-set to 350μA)
  • Coating thickness range: 64μm to 25.6mm
  • Built-in test voltage formula: NACE SP0274
  • Unit weight: 1.64Kg
  • Unit dimensions: 172mm x 85mm x 235mm
  • Handle weight: 720g
  • Handle dimensions: 290mm x 85mm
  • Packed weight: 13.6kg
  • Dimensions (packed): 510mm x 250mm x 630mm

 

Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.

No questions are available at this time

Be the first to ask!



Straight Phosphor-Bronze Brush - 100mm (E104)

Straight Phosphor Bronze Brush Electrodes 100mm / 4" wide  ...

Straight Phosphor-Bronze Brush - 150mm (E106)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 200mm (E108)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 250mm (E110)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 300mm (E112)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor Bronze Brush - 350mm (E114)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 400mm (E116)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 450mm (E118)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 500mm (E120)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 700mm (E128)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 800mm (E132)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 1000mm (E140)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Phosphor-Bronze Brush - 1200mm (E148)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. And are normally supplied with a 90° backing strip for fitting into the shoe attachment (A12). *Maximum length recommended for use with AC equipment is 150mm ...

Straight Silicone Rubber - 100mm (E204)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ont...

Straight Silicone Rubber - 150mm (E206)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ...

Straight Silicone Rubber - 200mm (E208)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ...

Straight Silicone Rubber - 250mm (E210)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ont...

Straight Silicone Rubber - 300mm (E212)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ont...

Straight Silicone Rubber - 350mm (E214)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ont...

Straight Silicone Rubber - 400mm (E216)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ont...

Straight Silicone Rubber - 450mm (E218)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ont...

Straight Silicone Rubber - 500mm (E220)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ont...

Straight Silicone Rubber - 600mm (E224)

The straight silicone rubber electrodes are normally supplied with a 90° backing strip, for fitting into the shoe attachment (A12). They can also be supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod, or with the Adaptor (A4), straight ont...

Straight Phosphor-Bronze Brush - 45° - 100mm (E104A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

Straight Phosphor-Bronze Brush - 45° - 150mm (E106A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched. They aresupplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle. *Maximum length re...

Straight Phosphor-Bronze Brush - 45° - 200mm (E108A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 250mm (E110A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 300mm (E112A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 400mm (E116A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 450mm (E118A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 500mm (E120A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 600mm (E124A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 700mm (E128A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

Straight Phosphor-Bronze Brush - 45° - 1200mm (E148A)

Straight phosphor bronze electrodes are used to test large flat areas that are not easily scratched.They are supplied with a 45° backing strip to enable the electrode to be connected directly to an extension rod or, with an adaptor (A4), straight onto the test probe handle.*Maximum length recommend...

© 2017 All Rights Reserved Buckleys (UVRAL) Ltd